Using The Postscript Printer Driver With Macintosh; Mac Os 8.6 Or 9.X Users - Epson EPL-N3000 Reference Manual

Note:
When printing via the USB port from a Power Macintosh running
Mac 0S 8.6 or 9.x, the printer must be set to handle ASCII data. To
specify this setting, select Print from the File menu of the application
that you are using, and then select the name of the application from
the options available in the Print dialog box. On the setup option
page that appears, select ASCII for the data format setting. The
actual setting name varies by application, but is often called
Encoding or Data.
For best results, you should connect the printer directly to the
computer's USB port. If multiple USB hubs must be used, we
recommend that you connect the printer to the first-tier hub.
Using the PostScript Printer Driver with
Macintosh

Mac OS 8.6 or 9.x users

Installing the printer driver
The Installer program that is included in the printer software
CD-ROM installs the PostScript printer driver. Before installing
the printer driver, make sure that your hard disk has at least 3.1
MB of free space.
The installer program has two installation methods: Easy Install
and Custom Install.
Easy Install installs all the files necessary to use the PostScript
printer driver. Normally, you should use the Easy Install method
since this ensures that all necessary files are copied and that your
computer is set up to give you the full benefit of the PostScript
printer driver.
128
Using the PostScript Printer Software (Macintosh)