Paper Does Not Feed Properly; Problems Printing In The Postscript 3 Mode - Epson EPL-N3000 Reference Manual

Paper does not feed properly

Cause
The paper guides are not set
correctly.
The paper source setting may
not be correct.
There may be no paper in the
cassettes.
The size of loaded paper
differs from the control panel
setting.
Too many sheets may be
loaded in a cassettes.
If paper does not feed from the
optional 550-Sheet Paper
Cassette Unit A4, the unit may
not be installed properly.

Problems Printing in the PostScript 3 Mode

The problems listed in this section are those that you may
encounter when printing with the PostScript driver. All
procedural instructions refer to the PostScript printer driver that
shipped with your printer.
What to do
Make sure that the paper guides in all
the paper cassettes are set in the correct
paper size positions.
Make sure that you have selected the
correct paper source in your
application.
Load paper.
Make sure that the correct paper size is
set in the control panel's Paper Source
and MP Tray Size settings.
Make sure that you have not tried to
load too many sheets of paper. For the
maximum paper capacity for each
paper source, see "MP tray" on page 15.
For instructions on installing the unit,
see "550-Sheet Paper Cassette Unit A4"
on page 191.
Troubleshooting
9
9
9
9
9
9
9
9
9
9
9
9
273