Epson EPL-N3000 Reference Manual page 17

g. Start/Stop button
h. Ready light
i. Data light
4
Getting to Know Your Printer
Switches the printer between ready and
offline status while no error has occurred.
When the printer is offline and the data
light is on, press it down for more than two
seconds to print the specified copies of the
first page of print job that the printer is
currently receiving.
When the error light is flashing, press this
button to clear the error and switch the
printer to ready status.
When the error light is on, perform
necessary procedures to clear the error,
and then press this button to switch the
printer to ready status.
Note:
When the error light is flashing, the printer may
automatically switch to ready status if you set the
Auto Continue to ON with the control panel
menu. See "Setup Menu" on page 352 for more
information.
On when the printer is ready, indicating
that the printer is ready to receive and
print data.
Off when the printer is not ready.
On or flashes when the printer is
processing data, or when print data is
stored in the print buffer (the section of
printer memory reserved for receiving
data) but not yet printed.
Off when no data remains in the print
buffer.