Epson EPL-N3000 Reference Manual page 106

Installing the printer driver for the network interface
Follow these steps to install the PostScript printer driver for the
network interface:
Note:
To connect using a network interface, you must install the optional
interface card into the printer.
You must have at least 6 MB of free space on your hard disk drive
to install the printer driver.
1. Insert the printer software CD-ROM into your CD-ROM
drive.
2. Click Start, then Settings, and finally Printers.
3. Double-click the Add Printer icon.
4. The Add Printer Wizard will be displayed. Click Next.
5. Select Network Printer when the screen asking How is this
printer attached to your computer? appears.
6. Enter the printer's network path in the Network path or queue
name field. You can also select the network printer by clicking
Browse.
7. When the screen asking you to select the printer model is
displayed, click Have Disk and specify the path to the
appropriate INF file necessary for installation. If your
CD-ROM drive is D:, the path will be
D:\ADOBEPS\ENGLISH\WIN9X\PS_SETUP (change the
drive letter as needed for your system).
8. Select the INF file for the version of the Windows operating
system that you are running and continue with the rest of the
installation according to the on-screen instructions.
9. When installation is done, click Finish.
Using the PostScript Printer Software (Windows)
4
4
4
4
4
4
4
4
4
4
4
4
93