Epson EPL-N3000 Reference Manual page 369

Paper Type
Specifies the type of paper to be used for printing. The printer
adjusts the printing speed according to this setting. The printing
speed is reduced when Thick or Trnsprnc is selected.
Skip Blank Page
Enables you to skip blank pages when printing. This setting is
available when you print in the PCL5e, ESC/Page, ESCP2, FX, or
I239X mode.
Auto Eject Page
Specifies whether or not to eject paper when the limit specified in
the Time Out setting is reached. The default is Off, which means
paper is not ejected when the time-out limit is reached.
Size Ignore
If you want to ignore a paper size error, select On. When you turn
this item on, the printer keeps printing even if the image size
exceeds the printable area for the specified paper size. This may
cause smudges because of the toner that is not transferred onto
the paper properly. When this item is turned off, the printer stops
printing if a paper size error occurs.
Auto Cont
When you turn this setting on, the printer automatically continues
printing after a certain period of time when one of the following
errors occurs: Paper Set, Print Overrun, or Mem Overflow. When
this option is off, you must press the N Start/Stop button to
resume printing.
356
Functions of the Control Panel