❏ Uninstall/Change (for Windows 7, Vista, Server 2008)
❏ Change/Remove (for Windows XP, Server 2003)
Note:
You can uninstall EPSON Network Utility by selecting EPSON Status Monitor from the menu. If you
monitor more than one printer on the network using EPSON Status Monitor, and if you uninstall
EPSON Network Utility, you cannot display any printer status from EPSON Status Monitor.
Using the PostScript Printer Driver
Computer system requirements
Windows
OS
Remarks
Mac OS X
OS Version
Computer
Note:
To use binary data, Epson recommends that you use AppleTalk for the printer's network connection. If
you use a protocol other than AppleTalk for the network connection, you need to set Binary to On in the
PS3 Menu on the control panel. For details about the settings, see the Network Guide. If you use the
printer with a local connection, you cannot use binary data.
Using the PostScript printer driver with Windows
To print in the PostScript mode, you will have to install the printer driver. See the appropriate sections
below for installation instructions according to the interface that you are using to print.
Recommended
Windows 7, 7 x64, Vista, Vista x64, XP, XP x64, Server 2008, Server 2008 x64, Server 2003, or Server
2003 x64
No restrictions for these systems
Recommended
Mac OS X 10.5.8 or later
Power Mac G3, G4, G5, iMac, eMac, PowerBook G3, G4, or iBook
AL-C500 Series
User's Guide
About the Printer Software
194