Printing-Related Troubleshooting - Xerox 8254E User Manual

5 Troubleshooting
No.
3 8264E only - Is the roll media set
correctly?
4 8254E only - Is the scroller set
correctly?
5.2.4

Printing-related troubleshooting

(1) Printing is partially stained or incomplete
• Proper print quality may not be obtained with media other than recommended ones.
No.
1 Has the media absorbed moisture?
2 Are you using folded or wrinkled
media?
3 Does the media bend?
(2) The printing position is incorrect (areas of the media cannot be printed)
No.
1 Is the loading position of the media
correct?
2 Did you set up the origin and print
position?
(3) Printing is blurred
No.
1 Are you using recommended media?
2 Are you using thick or thin media?
3 Is the media printed on the printing
surface?
4 Did you perform Alignment?
5 Did you perform Media feed
compensation?
6 Is each heater set to the appropriate
temperature?
7 Is the head height set to "High?"
172
Possible cause
Set the roll media correctly.
Set the scroller correctly.
Possible cause
Replace it with new media.
Use recommended media.
When using media other than the dedicated
one, set the Vacuum Fan menu.
Possible cause
Set the media correctly.
Cancel or reset the settings of the origin and
print position.
Possible cause
Use recommended media.
Use recommended media.
Confirm the printing surface of the media
and set it correctly.
Perform Alignment.
Perform Media feed compensation.
Set each heater to the appropriate
temperature.
Return the head height to "Normal (Low)".
Remedy
roll media
roll media
Remedy
roll media
Fan menu
Remedy
media
overview
Remedy
handling
compensation
Heater menu
4.6.1.1.6 After Heater
menu
adjustment
8254E / 8264E User Guide
Reference
3.5.1 Loading
3.5.1 Loading
Reference
6.2.2 Replacing
4.4.1 Media type
4.6.1.1.8 Vacuum
Reference
3.5.2 Setting roll
4.6 Menu
Reference
4.4.1 Media type
4.4.1 Media type
3.5 Media
3.7 Adjust print
4.8.2 Media feed
4.6.1.1.4 Pre-
through
4.5 Head height