Important Safety Instructions - Xerox 8254E User Manual

1 Safety Instructions
Warning
1.3

Important safety instructions

This section explains general precautions that must be followed in order to use this printer safely.
Your Xerox equipment and supplies have been designed and tested to meet strict safety requirements.
These include safety agency examination, approval, and compliance with established environmental
standards.
To ensure the continued safe operation of your Xerox equipment, follow these safety guidelines at all
times.
Always follow all warnings and instructions that are marked on or supplied with the equipment.
Do not install the printer in the following places. Injury or damage to the printer could result.
• On an unstable stand
• On an unstable surface
• On an uneven or slanted surface
• In an area subject to vibration by other equipment
Do not stand on or place heavy objects on the printer. Doing so may result in the printer tipping or
falling over, causing injury or damage.
Do not cover the fresh air inlet of the printer. Doing so may result in fire.
Do not install the printer in humid or dusty areas. Doing so may result in electrical shock or fire.
Do not use a damaged power supply cable. Doing so may cause electric shock or fire.
Do not connect or disconnect the power supply cable with wet hands. Doing so may cause electric
shock.
Do not connect ground lines to the following locations:
• Gas piping
• Telephone ground lines and lightning rods
Water piping and faucets
If a part of the piping is plastic, it will not serve as a ground.
Do not store combustible materials on the platen. Doing so may result in fire.
2
Used for special cautions and for information that needs to be emphasized.
There will be a possibility of causing fire or explosion.
A large current may flow if there is a lightning strike.
Meaning
8254E / 8264E User Guide