Version Menu (Setup Item 6 Of 7 Total); Sleep Mode Menu (Setup Item 7 Of 7 Total) - Xerox 8254E User Manual

4 Handling The Printer
4.6.6

Version menu (Setup item 6 of 7 total)

Allows you to display the versions of the printer's firmware.
Access this menu by pressing the [Menu] key which causes "Menu1: Setup>" to appear in the control
panel's display. Pressing the [-] key five times causes "Menu6: Version" to display. Press the [Enter] key
to display the current version of firmware.
Setup item
Ver.M/C
4.6.7

Sleep Mode menu (Setup item 7 of 7 total)

Allows you to configure Sleep Mode settings.
Access this menu by pressing the [Menu] key which causes "Menu1: Setup>" to appear in the control
panel's display. Pressing the [-] key six times causes "Menu7: Sleep Mode" to display.
From the "Menu7: Sleep Mode>" display, press the [Enter] key. Pressing the [-] and [+] keys allows you
to choose whether to set the auto cleaning interval or activate Sleep Mode immediately.
When you activate Sleep Mode, the printer operates as follows.
• The exhaust fan stops.
• The vacuum fan stops
• All heaters turn off.
• All lamps turn off except for the Power lamp
• Automatic head cleaning is performed after the time set in the Time Setting menu has expired.
4.6.7.1 Timer Setting menu
Setup item
Sleep Mode
118
Setting
*.**(Main)/*.**(Controller) Displays the versions of the firmware on the main side
(M) and controller side (C).
• Pressing the [Cancel] key shifts to the previous menu.
—
Setting
Set Timer Set the auto cleaning interval.
Activate Sleep Mode
Start
• Pressing the [Cancel] key shifts to the previous menu.
—
Description
Description
4.6.7.1 Timer Setting menu
4.6.7.2 Sleep Mode Start menu
4.6.1 Setup menu (Setup item 1 of 7
total)
8254E / 8264E User Guide