Table of Contents
Advertisement
3 Preparing For A Job
3.5
Media handling
This section explains how to set the media and describes the settings for each media type.
•
Refer to the following for details about handling media.
4.4 Using media
•
Refer to the following for types and details of recommended media.
4.4.1 Media type
7.3 Options/Supply list
3.5.1
Loading roll media
This section explains how to load roll media.
•
Roll media that does not exceed the following measurements can be attached to the
scroller supplied with these printers:
•
Media tube diameter: 77mm (3")
•
Outside diameter of media: 150mm (5.9")
•
Weight of media:
8264E maximum = 30kg (66lb.)
8254E maximum = 19kg (41.8lb.)
3.5.1.1
8264E Loading roll media
Follow the procedure below to load roll media on the 8264E.
1. Loosen the left side and right side roll media holders at the rear of the printer. To do this, pull the
lever towards you to release it from the ratchet. Then rotate the lever clockwise until you can no
longer firmly grasp it. Release the lever (so the ratchet engages), then rotate the lever counter-
clockwise until the media holders can be slid on their track.
2. Move both roll media holders outward, as shown below.
40
8254E / 8264E User Guide
Advertisement
Table of Contents
Troubleshooting
