4 Handling The Printer
•
The length of media that is fed (i.e., the feed length) for confirmation
adjustment printing is normally set at 250mm.
•
If you increase the feeding length, the accuracy of the Media feed
compensation improves.
•
To change the feeding length, press the [+] key or [–] key and change the set
value.
c. Press the [Enter] key. "Printing" displays in the control panel.
•
Confirmation adjustment printing starts.
No.
1
2
•
When the Confirm Print operation is complete"Ready to Print" displays in the control panel.
d. After the confirmation adjustment printing is complete, cut the media.
4.10.1 Cutting media
132
Feed length
Media feeding direction
Name
8254E / 8264E User Guide