Table of Contents
Advertisement
3 Preparing For A Job
3.6.2
Nozzle Check
This test is used to check whether there are any clogged nozzles, which may cause blurred prints or prints
that are missing data.
•
If the Nozzle Check result indicates that the checked points are blurred or missing,
clean the print head.
6.3.3 Cleaning the head
Perform the Nozzle Check once again at the end of the work.
•
Refer to the following for the printing procedure.
4.6.2 Test Print menu (Setup item 2 of 7 total)
64
8254E / 8264E User Guide
Advertisement
Table of Contents
Troubleshooting
