4 Handling The Printer
4.6.1.3.1
Flushing Return Count menu
This menu allows you to set how often the print head returns to the original flushing box when setting the
On Media option in the Flushing menu. This "how often" is called the Flushing Return Count.
You can access this sub-menu by pressing the [Enter] key while you have "On Media" displayed in the
control panel.
•
Increasing the flushing return count (which means longer times between flushings)
may result in clogging while continuously printing.
Setup item
ReturnCount
4.6.1.4
Side Margin menu
Allows you to set up the right and left Side Margins while printing.
•
When selecting "On Media" as the setting in the Flushing menu, the value of the Side
Margin menu is disabled and the margin on which the flushing operation will be
performed is set automatically.
4.6.1.3 Flushing menu
•
8264E only - When using the media holder plates, set the side margin setting to
10mm.
4.8.3 8264E only - Installing media holder plates
Setup item
SideMargin
100
Setting
0cnt to <5cnt> to 999cnt
Sets the Flushing Return Count.
Example
• 1cnt: The print head returns to the flushing box on the
• 5cnt: The print head returns to the flushing box on the
• Pressing the [Enter] key saves the setting and shifts to
• Pressing the [Cancel] key cancels the setting and
—
Setting
8264E - <5mm> to 25mm
Sets the side margins.
• Pressing the [Enter] key saves the setting and shifts to
-
8254E
<3mm> to 25mm
• Pressing the [Cancel] key cancels the setting and
—
Description
original side every time the print head leaves and
returns.
original side every fifth time the print head leaves and
returns.
the previous menu.
shifts to the previous menu.
4.6.1 Setup menu (Setup item 1 of 7 total)
Description
the previous menu.
shifts to the previous menu.
4.6.1 Setup menu (Setup item 1 of 7 total)
8254E / 8264E User Guide