After Heater Menu; Standbyheating Menu - Xerox 8254E User Manual

4 Handling The Printer
4.6.1.1.6

After Heater menu

The 8254E calls this the "Drier menu" but the items and steps are identical.
Allows you to set up the After Heater temperature to dry the printed media. This control is active during
printing operation.
• The preset temperature of the After Heater varies, depending on the media.
For the preset temperature of the After Heater, contact your local XEROX Sales
Representative for a recommended media list.
Setup item
AfterHeater
4.6.1.1.7

StandbyHeating menu

Allows you to set up the length of time to preheat the heater while the printer is in standby mode.
Setup item
Standby
96
Setting
Off / <30° C> to 50° C Sets up the After Heater temperature.
• Pressing the [Enter] key saves the setting and shifts to
• Pressing the [Cancel] key cancels the setting and
—
Setting
10 min to <60 min> to 240 Sets the length of time to preheat the heaters.
min When more than the set time has passed, each heater
turns off.
• Pressing the [Enter] key saves the setting and shifts to
• Pressing the [Cancel] key cancels the setting and
—
Description
1. Roll media
2. After Heater
3. Print head
the previous menu.
shifts to the previous menu.
4.6.1.1.1 User media menu
Description
the previous menu.
shifts to the previous menu.
4.6.1.1.1 User media menu
8254E / 8264E User Guide