General; Charging - Viessmann Vitoligno 300-C Installation And Service Instructions For Contractors

Codes
Code 2
(cont.)
8. to confirm.
d
"Adopted" appears briefly in the display.
9. Exit the service menu.
ä
Overview
The coding addresses are displayed in groups, subject
to system configuration:
■

"General"

See page 62
■

"Charging"

See page 62
General
Coding
Coding in the delivered condition
Fault message output delay
80:6 Minimum fault duration of 30 s be-
fore a fault message is issued.
Automatic summer/wintertime changeover
81:1 Automatic summer/wintertime
changeover
Outside temperature time constant
90:128 Time constant for calculating the
adjusted outside temperature
21.5 h
Outside temperature offset
92:0 No outside temperature correction. 92:- 10
Charging
Is available, if code "Charging scheme", Hardware
group, is selected.
Coding
Coding in the delivered condition
Charge time, combustion chamber
1E:130 Feed screw conveyor runtime of
130 s
Charge time, screw conveyor
1F:80 Feed screw conveyor runtime of
80 s to fill the feed screw conveyor.
62
"Heating"
■
See page 63
■ "Boiler"
See page 64
■ "DHW"
See page 67
Possible change
Adjustable from 0 to 995 s. 1 step ≙
80:0
to 5 s.
80:199
81:0 Manual summer/wintertime change-
over
90:0 Fast (low values) or slow (high val-
to ues) matching of the flow tempera-
90:199 ture, subject to the set value accord-
ing to changes in outside tempera-
ture; 1 step ≙ 10 min
Correction of the outside tempera-
to ture by the value set in °C.
92:10
Possible change
1E:10 Setting range in s
to
1E:240
1F:5 Setting range in s
to
1F:900