Displaying The Current Bridge Sta - Enterasys Vertical Horizon VH-2402S2 Configuration Manual

Enterasys vertical horizon vh-2402s2: user guide
Hide thumbs Also See for Vertical Horizon VH-2402S2:
Table of Contents

Advertisement

Displaying the Current Bridge STA

The parameters shown in the following figure and table describe the
current Bridge STA Information.
Priority
Hello Time (in seconds)
Max Age (in seconds)
Forward Delay (in seconds) : 15
Hold Time (in seconds)
Designated Root
Root Cost
Root Port
Configuration Changes
Topology Up Time
Parameter
Priority
Hello Time
Max Age
Forward Delay
Hold Time
Designated Root
Root Cost
Root Port
Configuration
Changes
Topology Up Time
42 VH-2402S2 User Interface
Vertical Horizon Stack Local Management
Spanning Tree Information : STA Bridge Information
<Enter> to select.
Figure 2-30. Bridge STA Information
Description
Device priority is used in selecting the root device, root port, and
designated port. The device with the highest priority becomes the STA
root device. However, if all devices have the same priority, the device
with the lowest MAC address will then become the root device.
The time interval (in seconds) at which the root device transmits a
configuration message.
The maximum time (in seconds) a device can wait without receiving a
configuration message before attempting to reconfigure.
The maximum time (in seconds) the root device will wait before
changing states (i.e., listening to learning to forwarding).
The minimum interval between the transmission of consecutive
Configuration BPDUs.
The priority and MAC address of the device in the spanning tree that
this switch has accepted as the root device.
The path cost from the root port on this switch to the root device.
The number of the port on this switch that is closest to the root. This
switch communicates with the root device through this port. If there is
no root port, then this switch has been accepted as the root device of
the spanning tree network.
The number of times the spanning tree has been reconfigured.
The time since the spanning tree was last reconfigured.
: 32768
: 2
: 20
: 1
: 32768.0000E89A3BE0
: 0
: 0
: 0
: 1680374 (0 day 4 hr 40 min 3 sec)
<OK>
VH-2402S2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vertical horizon vh-2402sm2

Table of Contents