Console Login Configuration - Enterasys Vertical Horizon VH-2402S2 Configuration Manual

Console Login Configuration

Use the Management Setup: Console Login Configuration to restrict
management access based on specified user names and passwords, or
to set the invalid password threshold and timeout. There are only two user
types defined, ADMIN (Administrator) and GUEST, but you can set up to
five different user names and passwords. Only Administrators have write
access for parameters governing the switch. You should therefore assign
a user name and password to the default Administrator as soon as
possible, and store it in a safe place. (If for some reason your password
is lost, or you cannot gain access to the System Configuration Program,
contact Enterasys Networks Technical Support for assistance.) The
parameters shown on this screen are indicated in the following figure and
table.
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter
Password Threshold
Lock-out Time
Admin*
Guest*
* Passwords can consist of up to 11 alphanumeric characters and are not case
sensitive.
9033820-03
Vertical Horizon Stack Local Management
Console Login Configuration
Password Threshold
Lock-out Time (in minutes) : 0
User Type
----------------------------------------
1. ADMIN
2. GUEST
3.
4.
5.
<APPLY>
Figure 2-16. Console Login Configuration
Default
3
0
name: admin
password: null
name: guest
password: null
: 3
User Name Password
admin
guest
<OK>
Description
Sets the password intrusion threshold which limits
the number of failed logon attempts.
Range : 0~65535
The time (in seconds) the management console
will be disabled, due to an excessive number of
failed logon attempts.
Range : 0~65535
Administrator has access privilege of Read/Write
for all screens.
Guest has access privilege of Read Only for all
screens.
<CANCEL>
VH-2402S2 User Interface 25