Monitoring The Switch - Enterasys Vertical Horizon VH-2402S2 Configuration Manual

Monitoring the Switch

The Network Monitor Menu provides access to port statistics, RMON
statistics, IP multicast addresses, and the static (unicast) address table.
Each of the screens provided by these menus is described in the following
sections.
Parameter
Port Statistics
RMON Statistics
Unicast
Address Table
Multicast Address
Registration Table
IP Multicast
Registration Table
Static Unicast
Address Table
Configuration
Static Multicast
Address Table
Configuration
62 VH-2402S2 User Interface
Vertical Horizon Stack Local Management
Network Monitor Menu
Port Statistics ...
RMON Statistics ...
Unicast Address Table ...
Multicast Address Registration Table ...
IP Multicast Registration Table ...
Static Unicast Address Table Configuration ...
Static Multicast Address Table Configuration...
Use <TAB> or arrow keys to move. <Enter> to select.
Figure 2-48. Network Monitor Menu
Description
Displays statistics on network traffic passing through the selected
port.
Displays detailed statistical information for the selected port such
as packet type and frame size counters.
Provides full listing of all unicast addresses stored in the switch,
as well as sort, search and clear functions.
Displays the ports that belong to each GMRP Muticast group.
(Not implemented in this firmware release.)
Displays the ports that belong to each IP Muticast group.
Allows you to display or configure static unicast addresses.
Allows you to display or configure static GMRP multicast
addresses. (Not implemented in this firmware release.)
<OK>
VH-2402S2