Main Menu - Enterasys Vertical Horizon VH-2402S2 Configuration Manual

Main Menu

The Main Menu is the first screen seen after successfully logging into the
system. Figure 2-2 shows the Main Menu and the accompanying table
describes the Main Menu
Selection
System Information Menu
System Information
Switch Information
Stacking Information
Management Setup Menu
Network Configuration
Serial Port
Configuration
SNMP Configuration
Console Login
Configuration
TFTP Download Agent
F/W
Configuration Save &
Restore
9033820-03
.
Vertical Horizon Stack Local Management
System Information Menu...
Management Setup Menu...
Device Control Menu...
Network Monitor Menu...
System Restart Menu...
Exit
Use <TAB> or arrow keys to move. <Enter> to select.
Figure 2-2. Main Menu
Description
Provides basic system description, including contact
information.
Shows hardware/firmware version numbers, power status,
and expansion modules used in the stack.
Shows information on the closed-loop stacking status.
Includes IP setup, Ping facility, HTTP (Web agent) setup,
Telnet configuration, and MAC address.
Sets communication parameters for the serial port, including
management mode, baud rate, console time-out, and screen
data refresh interval.
Activates traps; and configures communities and trap
managers.
Sets user names and passwords for system access, as well
as the invalid password threshold and lockout time.
Downloads new version of firmware to update your system
(in-band).
Saves the switch configuration to a file on a TFTP server.
This file can be later downloaded to restore the configuration.
Main Menu
VH-2402S2 User Interface 9