Downloading System Software - Enterasys Vertical Horizon VH-2402S2 Configuration Manual

Downloading System Software

Using TFTP Protocol to Download Over the Network
Use the TFTP Download menu to load software updates into the switch.
The download file should be a VH-2402S2 file from Enterasys Networks;
otherwise the agent will not accept it. The success of the download
operation depends on the accessibility of the TFTP server and the quality
of the network connection. After downloading the new software, the agent
will automatically restart itself. Parameters shown on this screen are
indicated in the following figure and table.
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter
Download Server IP
Agent Software Upgrade Indicates that the switch is enabled for software upgrades.
Download Filename
Download Mode
[Process TFTP
Download]
Download Status
Backup Master Image
Sync status
26 VH-2402S2 User Interface
Vertical Horizon Stack Local Management
TFTP Download Agent F/W
Download Server IP :
Agent Software Upgrade
Download Filename
Download Mode
[Process TFTP Download]
Download status : Complete
Backup Master Image Sync status :
<APPLY>
Figure 2-17. TFTP Download
Description
IP address of a TFTP server.
The binary file to download to the agent module.
Indicates that the download is to permanent flash ROM.
Issues a request to the TFTP server to download the specified
file.
Indicates if a download is "Complete" or "In Progress."
Indicates the status of software synchronization with a backup
management agent. The software synchronization function
automatically copies new system software from the master to
the backup agent. In a stack with a backup management
agent installed, this process happens automatically after a
TFTP download has completed.
: ENABLED
:
: PERMANENT
<OK>
0 %
<CANCEL>
VH-2402S2