Enterasys Vertical Horizon VH-2402S2 Configuration Manual page 26

Parameter
IP State
Master IP
Backup IP
18 VH-2402S2 User Interface
Default Description
USER- Specifies whether IP functionality is enabled via
CONFIG manual configuration, or set by Boot Protocol
(BOOTP). Options include:
USER-CONFIG - IP functionality is enabled
BOOTP Get IP - IP is enabled but will not function
Shows the IP address of the switch in the stack
operating as Master.
Shows the IP address of the switch in the stack
operating as Backup Master.
based on the default or user
specified IP Configuration.
until a BOOTP reply has been
received. BOOTP requests will
be periodically broadcast by the
switch in an effort to learn its IP
address. (BOOTP values can
include the IP address, default
gateway, and subnet mask.)
VH-2402S2