VLAN Forbidden Ports Configuration
Use this screen to prevent a port from being automatically added to a
VLAN via the GVRP protocol. (Note that GVRP is not implemented in the
current firmware release.)
Indexed by
VLAN ID
VLAN Name
Use <TAB> or arrow keys to move, other keys to make changes.
Figure 2-37. VLAN Forbidden Ports Configuration
Parameter
Unit
Permanent
Forbidden Ports
Indexed by
VLAN ID
VLAN Name
[Show]
[More]
50 VH-2402S2 User Interface
Vertical Horizon Stack Local Management
GVRP VLAN Configuration: VLAN Forbidden Ports
Permanent
Unit
Forbidden Ports
----------------------------
1
2
3
4
5
6
7
: VID
: 1
:
<APPLY>
Description
Stack unit.
A list of ports, or range of ports, on a stack unit that are not allowed
to be automatically added to this VLAN via GVRP.
Indicates if VLANs are displayed by ID or name.
The ID for the VLAN currently displayed. Range: 1-2048
A user-specified symbolic name for this VLAN.
String length: Up to 8 alphanumeric characters
Displays settings for the specified VLAN.
Displays consecutively numbered VLANs.
-----------------
-----------------
-----------------
-----------------
-----------------
-----------------
[Show]
[More]
<OK>
<CANCEL>
VH-2402S2