Sony KF-60XBR800 Manual page 9

This setting is used to turn individual LCD panels on and off for the color
decoder and gray scale calibration.
2170P-2 (Category)
RGBS [Panel Switch]
These settings will change the illumination response and color of the
display.
2170P-4 (Category)
SCOL [Sub Color]
SHUE [Sub Hue]
SPIC [Sub Picture]
GAMM [Gamma]
RYR [Red color decoder]
RYB [Red color decoder]
GYR [Green color decoder]
GYB [Green color decoder]
A
Setting these identical helps all the other settings stays the same.
B
This setting improves the contrast on the screen.
C
The color decoder settings are used to balance the level of each color relative to
that found in white.
D
Look at faces to judge this on other inputs.
Input Independent
7= All on (Normal)
6= Blue off
5= Green off
4= Red only
3= Red off
2= Green only (you will need to
temporarily drop the user menu picture
setting for this mode due to a bias)
1=Blue only (you will need to
temporarily drop the user menu picture
setting for this mode due to a bias)
0=All off
Composite
29
30
12
0
BLK
0
6
15
12
6
8 of 12
2/17/02
2/17/03
Component DVI
29 29
30 30
12 12
0 0
0 0
6 6
14 14
13 13
3 3
A
A
A
B
C
C
C
D