Sony KF-60XBR800 Manual page 11

Set the level of green to match its ratio to white (0.587) without any filter using
GYR. Set the level of yellow and cyan to match their ratios to white (0.866 & 0.701)
using GYB. It may not be possible to exactly match both cyan and yellow. Distribute
the error such that yellow looks like a bright lemon.
An AEMC CA813 light meter is recommended for this purpose. This meter has an
error rating of + -3% of the reading and follows the CIE photoptic response.
Use this setting if you want to change the brightness of the bars that the TV
puts on the screen in 4:3.
MID1 COM (Category)
Use these settings to center your image with an anamorphic 16:9 test
pattern like that found on THX Optimode.
MID1 COM (Category)
Use these settings to center your image with a 4:3 test pattern like that
found on Avia.
MID2 DRC (Category)
1/11/03
Input
Independent
BCOL
1/29/03
Check Each Input
DHPH
DVPH
MDHS
MDVS
1/30/03
Check Each Input
DRHP
DRHS
DRVP
DRVS
10 of 12
Increase this
value to
increase
brightness.
0
Horizontal Position
Vertical Position
Horizontal Size
Vertical Size
Horizontal Position
Horizontal Size
Vertical Position
Vertical Size