Download Print this page

Sony KF-60XBR800 Manual page 23

Hide thumbs Also See for KF-60XBR800:

Advertisement

UMR's Tweak Settings
Go Back To Categories
(1) How should I start? First hook up a DVD with a test disk and calibrate the Picture,
Brightness, Color, Hue and Sharpness in the user menu under PRO mode.
(2) How do I change UPOG and UBOG? Make the change, save the changes, and cycle
through the modes.
(3) I implemented the "IMAGE DETAIL" settings but I saw no improvements.
Why? You need to be on a high quality source to see the difference. Go to the Service
Menu while you are watching a high quality dvd source that is pause and the change
should be obvious.
(4) What do you mean by "Cycle through the Modes"? It means to force the TV to
load the settings for Pro by leaving Pro mode and then reentering it.
(5) Are menu settings (Brightness, sharpness, hue, etc, the stuff you can do during
normal operations) linked to the type of input rather than which input jack one is
using? In other words all S-Video (for example), uses the same settings regardless
which video input jack is being used. I won't be able to have one set of settings for a
Sat dish using S-Video and one set of settings for a VCR using S-Video, correct?
There are multiple ways of adjusting those parameters. You have four user menu modes
available that are toggled by the user and not input dependent. There are also service
menu adjustments for each of those modes based on input RF, Video, Component 480i,
Component 480p, Component 720p, Component 1080i and DVI.
So you can have four sets of settings per input type listed above if you are willing to
toggle the picture mode (Pro, Vivid...). If you do not want to toggle modes and stick with
Pro only then each of the above input types can have different settings.
(6) How's the text look, is it sharp and readable from a distance like on the dlp?
With the tweaks for eliminating the edge enhancement this set looks as sharp as the 507
on test patterns.
(7) Have you played with the Fan Speed in the SM?
Yes. I have been able to change the fan speed, but I am not willing to risk lowering the
fan speed to reduce the noise level.
(8) I have Time Warner Cable in NYC with HD. Will these tweaks work for me?
Yes.
3 of 24

Advertisement

loading

This manual is also suitable for:

Kf-50xbr800