Other Cable - Parker FL20-CA Series Product Manual

Name Model
Shielded SC-ECT**
M-C
network cable
In cable model, **M means ** meter, user can select cable length. As shown in the figure, cable
length is L (unit is cm), error is ± 2cm. For example, 30cm cable model is SC-ECT0.3M-C.
Ethernet Category 5 (100BASE-TX) network cable or high-strength shielded network cable is
used as the EtherCAT communication cable. The double-layer shielded network cable is
recommended for servo drive. When EtherCAT communication is selected, the single network
cable between any two of servo drive should not be longer than 50 meters; good network cable
can improve anti-interference capability between master station and servo drive.
Direct-through or crossover Ethernet cables are allowable. Cable characteristic impedance is
100Ω±5%（characteristic frequency below 1000MHz）. The double-layer shielded
100M-Ethernet enhanced category 5 or better network cable is recommended.

11.5 Other cable

Communication cable
Name
Communication cable 1394-2TR-*M-0.3
Motor brake cable
Name Model
Brake HK3-2BR-*M-0.75
Actual length
cable
Brake
DB2-2BR-*M-0.75 Actual length
cable
Length
label
According to
requirement
1 8
Model Length
*M means length
Length
317
Appearance
L±20mm
8 1
Appearance
None
Appearance