Table of Contents
Advertisement
3.4.12.
Overspeed test
A qualification test at 20% above the rated speed during at least 1 min, must be carried
out according to the standard IEC 60034-1.
3.4.13.
EMC Directive
cf. guide lines 2004-108 CE and standard IEC 61800-3
It is the integrator's responsibility to ensure that the complete motor and drive in use
comply with the EMC directive.
3.4.14.
Other requirements
The previous list is not exhaustive and all the other requirements in the regulation
standard and directives must be checked by the integrator.
58 - PVD 3664_GB_NK-November 2016.Docx
Advertisement
Table of Contents
