Winch Replacement - Polaris General 2020 Service Manual

WINCH REPLACEMENT

REMOVAL
1. Disconnect battery.
q
2. Remove four fasteners
plate.
3. Disconnect electrical wires from bus bar.
4. Disconnect contactor connector.
5. Remove the lower fastener on the passenger front
shock.
6. Remove winch from passenger side.
NOTICE
If required, remove winch mounting plate.
9850067 R01 - 2020-2021 GENERAL / GENERAL XP Service Manual
© Copyright Polaris Inc.
securing winch to mounting
FACTORY-INSTALLED OPTIONS
w
7. Remove four 15mm nuts
8. Remove winch mounting plate from vehicle.
INSTALLATION
1. Reinstall winch bracket and fasteners
removed. If not, skip to step 2.
TORQUE
Winch Mounting Plate:
30 lb-ft (41 Nm)
2. Install the winch from the passenger side.
retaining mounting plate.
13
q
if previously
13.23