ELECTRICAL
WINCH SERVICE
WINCH REPLACEMENT
Removal
1. Disconnect Battery.
2. Remove four fasteners
plate.
3. Disconnect electrical wires from bus bar.
4. Disconnect contactor connector.
5. Remove the lower fastener on the passenger front
shock.
6. Remove winch from passenger side.
NOTICE
If required, Remove winch mounting plate.
11.80
q
securing winch to mounting
7. Remove four 15mm nuts
8. Remove winch mounting plate from vehicle.
Installation
1. Reinstall winch bracket and fasteners
removed. If not, skip to step 2.
TORQUE
Winch Mounting Plate:
30 lb-ft (41 Nm)
2. Install the winch from the passenger side.
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
w
retaining mounting plate.
q
if previously
© Copyright Polaris Industries Inc.