Polaris General 2020 Service Manual page 105

XU - PERFORM THESE PROCEDURES MORE OFTEN FOR VEHICLES SUBJECTED TO SEVERE USE.
D - HAVE AN AUTHORIZED POLARIS DEALER PERFORM THESE SERVICES.
E - EMISSION CONTROL SYSTEM SERVICE.
CODE ITEM
Cooling System
XU Radiator
Engine Oil Lines/Fasteners
XU
XU - PERFORM THESE PROCEDURES MORE OFTEN FOR VEHICLES SUBJECTED TO SEVERE USE.
D - HAVE AN AUTHORIZED POLARIS DEALER PERFORM THESE SERVICES.
E - EMISSION CONTROL SYSTEM SERVICE.
CODE ITEM
Brake Pads / Parking Brake Pads
XU / D
(INTL)
Parking Brake Cable Adjustment
XU / D
(INTL)
Battery
Fuel System
Front Gearcase Fluid (Demand Drive
XU
- Extreme Use)
Front Gearcase Fluid (Demand Drive) Fluid level inspection; add lubricant if needed
XU
Transmission Fluid (AGL)
XU
XU - PERFORM THESE PROCEDURES MORE OFTEN FOR VEHICLES SUBJECTED TO SEVERE USE.
D - HAVE AN AUTHORIZED POLARIS DEALER PERFORM THESE SERVICES.
E - EMISSION CONTROL SYSTEM SERVICE.
CODE ITEM
Brake Pads / Parking Brake Pads
XU / D
(INTL)
Parking Brake Cable Adjustment
XU / D
(INTL)
Battery
Fuel System
Front Gearcase Fluid (Demand Drive
XU
- Extreme Use)
Front Gearcase Fluid (Demand Drive) Fluid level inspection; add lubricant if needed
XU
Transmission Fluid (AGL)
XU
Engine Oil/Filter Change
XU
Front Gearcase Fluid (Demand Drive) Change fluid
XU
Transmission Fluid (AGL)
XU
XU General Lubrication
Shift Linkage
9850067 R01 - 2020-2021 GENERAL / GENERAL XP Service Manual
© Copyright Polaris Inc.
ACTION
Inspect coolant strength seasonally; pressure test system yearly
Inspect; clean external surfaces
Inspect for leaks and loose fittings
75 HOUR / 750 MILES (1200 KM) SERVICE
ACTION
Inspect pad wear; replace if worn beyond service limit
Inspect; adjust tension as needed
Check terminals; clean; test
Inspect; cycle key to pressurize fuel pump; check lines and fittings for leaks
and abrasion
Change fluid every 25 hours if subjected to extreme use
Fluid level inspection; add lubricant if needed
100 HOUR / 1000 MILES (1600 KM) SERVICE
ACTION
Inspect pad wear; replace if worn beyond service limit
Inspect; adjust tension as needed
Check terminals; clean; test
Inspect; cycle key to pressurize fuel pump; check lines and fittings for leaks
and abrasion
Change fluid every 25 hours if subjected to extreme use
Fluid level inspection; add lubricant if needed
Perform oil / filter change
Change fluid
Lubricate all fittings, pivots, cables, etc.
Inspect, lubricate, adjust
MAINTENANCE
2
2.9