Polaris General 2020 Service Manual page 211

a
17. Install dowel pins into oil pump mounting holes.
f
18. Install the three bolts that retain oil pump
crankcase. Torque mounting bolts to specification.
TORQUE
Oil Pump Mounting Bolts:
7 ft-lbs (10 N·m)
19. Reinstall oil pump pick-up
screws to specification.
TORQUE
Oil Pump Pick-Up Retaining Screws:
7 ft-lbs (10 N·m)
20. Clean the gasket sealing surfaces on oil sump cover
and crankcase to remove old gasket material and
any oil.
NOTICE
Gasket surfaces must be DRY and oil free. Use care
upon assembly to keep oil away.
9850067 R01 - 2020-2021 GENERAL / GENERAL XP Service Manual
© Copyright Polaris Inc.
21. Apply a thin, continuous film of Crankcase Sealant
d
to the
22. Install the oil sump cover
23. Install the thirteen M6
s
. Torque mounting
ENGINE / COOLING SYSTEM
(PN 2871557) to sump cover mating surface
shown. Do not allow sealant to dry before assembly.
h
onto the crankcase.
j
and three M8 bolts that
k
retain the oil sump cover to the crankcase.
g
as
3
3.57