Vehicle-To-Vehicle (V2V) Antenna Service (4-Seat) - Polaris General 2020 Service Manual

4. Join connector from antenna to connector on RIDE
COMMAND harness. Ensure harness is routed and
secured to roof panel using two edge clips.
9850067 R01 - 2020-2021 GENERAL / GENERAL XP Service Manual
© Copyright Polaris Inc.
FACTORY-INSTALLED OPTIONS
VEHICLE-TO-VEHICLE (V2V) ANTENNA
SERVICE (4-SEAT)
REMOVAL
1. Disconnect the V2V antenna connector from RIDE
COMMAND ® harness .
2. Cut and remove the panduit strap securing antenna
harness to the ROPS.
3. Open the clamshell cover and remove the two
fasteners securing the V2V antenna to ROPS B-pillar
bracket.
4. Carefully remove the V2V antenna by removing the
antenna cable through hole in ROPS B-pillar bracket.
13
13.67