Polaris General 2020 Service Manual page 487

6. Attach shock to control arm with fastener
lower shock bolt to specification.
TORQUE
Shock Mount Fasteners:
51 lb-ft (70 Nm)
7. Attach stabilizer link to control arm with fastener
Torque to specification
TORQUE
Front Stabilizer Bar Link Fastener:
81 lb-ft (110 Nm)
8. Install NEW ball joint into control arm. Refer to "Ball
Joint Installation" page 9.52 procedure.
9850067 R01 - 2020-2021 GENERAL / GENERAL XP Service Manual
© Copyright Polaris Inc.
i LOWER CONTROL ARM
. Torque
1. Insert NEW pivot caps
and pivot tube
force may be needed.
2. Install lower control arm assembly onto vehicle frame.
Torque NEW fasteners
o
.
Front Inner Control Arm Fasteners:
STEERING / SUSPENSION
q
, control arm bushings
e
into new control arm. A light press
r
to specification.
TORQUE
81 lb-ft (110 Nm)
w
,
9
9.43