Table of Contents
Advertisement
Fixing Unit
Dirt may adhere to the fixing units inside the machine and cause black streaks to appear on printouts. To clean the
fixing unit, perform the following procedure. Note that you cannot clean the fixing unit when the machine has
documents waiting to be printed. To clean the fixing unit, you need plain A4 or Letter size paper. Set the paper in the
paper drawer or multi-purpose tray before performing the following procedure.
●
Cleaning consumes the toner cartridge. Make sure that there is sufficient toner cartridge remaining
beforehand.
Checking the Amount Remaining in the Toner Cartridge(P. 794)
●
If the problem cannot be fixed by the following procedure, repeat cleaning in step 6 with the printed side
face up this time.
1
Press
and tap <Menu>.
2
Tap <Adjustment/Maintenance>.
3
Tap <Clean Fixing Assembly>.
4
Check that the size and type of paper displayed is loaded in the machine, and tap
<OK>.
5
Tap <Start>.
➠
The cleaning sheet is printed out.
6
Load the printed cleaning sheet in the multi-purpose tray, with the printed side face
down.
Maintenance
788
Loading Paper(P. 50)
0Y9U-0CH
Advertisement
Table of Contents
