Table of Contents
Advertisement
The authentication method of the machine is set to <Shared Key>, but that of the wireless router is set to
"Open System."
●
Change the WEP authentication method to "Shared Key" at the wireless router, and connect again. For
more information about how to change, see the instruction manuals for your networking devices or
contact your manufacturer.
Direct Connection terminated.
Connection between the machine and the mobile device was terminated.
●
Reestablish Direct Connection.
Make Direct Connection (Access Point Mode)(P. 388)
Faxing is restricted.
Faxing is disabled in the Department ID Management.
●
Log on with a Department ID for which faxing is not disabled. For the Department ID and PIN, contact
your Administrator.
Setting the Department ID Management(P. 526)
Insert the toner cartridge.
The toner cartridge is not set or properly set.
●
Properly set the toner cartridge.
How to Replace Toner Cartridges(P. 798)
Memory full. Check error info. using the Status Monitor key.
The memory became full of print data that could not be printed due to errors.
●
Cancel printing of the documents with errors or print the documents by tapping <Skip Error> in the print
job status screen.
Canceling Prints(P. 241)
Memory Media Print is restricted.
The function that prints files in a USB memory device is disabled.
●
Set <Memory Media Print On/Off> to <On>.
Restricting the Memory Media Print Function(P. 565)
Troubleshooting
738
Advertisement
Table of Contents
