Table of Contents
Advertisement
7
Tap the WEP key you have edited.
Using WPA-PSK or WPA2-PSK
1
Tap <WPA/WPA2-PSK>.
2
Select an encryption method.
<Auto>
Sets the machine to automatically select AES-CCMP or TKIP to match the setting of the wireless router.
<AES-CCMP>
Sets AES-CCMP as the encryption method.
3
Enter the network key that you have written down.
●
Enter the network key using the numeric keys, and tap <Apply>.
8
Tap <Yes>.
If an error message is displayed during setup
●
Tap <Close>, check whether the specified settings are correct, and return to step 5.
9
Check that the Wi-Fi indicator is blinking on the operation panel.
●
The Wi-Fi indicator blinks when a wireless router is detected.
Network
431
Advertisement
Table of Contents
