Table of Contents
Advertisement
Printing on the Back Side of Printed Paper (Manual 2-Sided Printing)
You can print on the back side of printed paper. Flatten any curls on the printed paper and insert it into the
multi-purpose tray (
(previously printed side face down).
●
Load one sheet of paper each time you print.
●
You can use only the paper printed with this machine.
●
You cannot print on the side that has previously been printed on.
Loading Custom Size Paper
To load custom size paper or other paper whose size is not found in the paper size markings on the paper drawer, use
the following procedure.
1
Pull out the paper drawer.
●
Make sure to hold the paper drawer with both hands, and pull it out gently. Otherwise, you may damage
the paper drawer by dropping it, if it slides out too easily.
2
Slide the paper guides apart.
●
Press the lock release lever to slide the paper guides outward.
3
Load the paper so that the edge of the paper stack is aligned against the front side of
the paper drawer.
●
Load the paper with the print side face down.
●
Fan the paper stack well, and tap it on a flat surface to align the edges.
Basic Operations
Loading Paper in the Multi-Purpose Tray(P. 57) ), with the side to print face up
54
Advertisement
Table of Contents
