Configuring SNTP
●
The SNTP of the machine supports both NTP (version 3) and SNTP (versions 3 and 4) servers.
1
Start the Remote UI and log on in System Manager Mode.
UI(P. 606)
2
Click [Settings/Registration].
3
Click [Network Settings]
Network
Simple Network Time Protocol (SNTP) enables you to adjust the system clock by
using the time server on the network. The protocol is typically used for synchronizing
the machine and a server, such as when the machine needs to access an LDAP server
with the security authentication that was enabled. The time is adjusted based on
Coordinated Universal Time (UTC), so specify the time zone setting before
configuring SNTP (
Date/Time Settings(P. 645) ). SNTP settings can be specified
via the Remote UI.
[TCP/IP Settings].
505
0Y9U-08E
Starting Remote