Select the protocol for the destination.
[Windows (SMB)]
[FTP]
[Host Name]
●
For a shared folder
Enter the computer name or IP address using up to 120 characters. You can include a path to the shared
folder with the computer name or IP address (e.g. "\\swan\share" or "\\192.168.2.100\share").
●
For an FTP server
Enter the IP address of the FTP server using up to 120 characters (e.g. "192.168.2.100").
Using a DNS server
●
You can also enter the host name (or FQDN) instead of the computer name or IP address (e.g. for a shared
folder: "\\swan.organization.company.com\share").
[Folder Path]
Enter the location of the folder to which the data will be sent (up to 120 characters).
●
For a shared folder
Use "\" as a separator. Specify the level that follows the path specified in [Host Name].
●
For an FTP server
Use "/" as a separator. The path is an absolute path when a "/" is placed at its top, otherwise a relative path
with respective to the current directory of the user who has logged in.
[User Name]
Enter the user name set for the shared folder or FTP server (up to 32 characters).
[Set Password]
To set a password for the shared folder or FTP server, select this check box and enter a [Password] of up to 32
characters.
Ensure that the same display language is selected on both the computer and the
Remote UI.
●
[Host Name] and [Folder Path] may not be displayed correctly or may not be referenceable.
7
Click [OK].
LINKS
Remote UI Screens(P. 608)
Saving/Loading Settings Data(P. 619)
Address Book List(P. 815)
Using Remote UI
Select this when registering a shared folder as a destination.
Select this when registering an FTP server as a destination.
627