Table of Contents
Advertisement
Do smudges appear on printouts depending on the paper type or the
operating environment?
●
Change the setting for [Special Print Adjustment A]. The improvement effect is weakest with [Mode 1] and
strongest with [Mode 4]. Try the adjustment starting with [Mode 1].
Setting in the Printer Driver
[Finishing] tab
[Advanced Settings]
Specifying Settings in the Setting Menu of the Operation Panel
Special Printing Mode A(P. 703)
●
When printing from the computer, the setting in the printer driver takes precedence. When the setting of
[Graphics Mode] in the printer driver is changed to [UFR II Mode], the setting in the operation panel takes
precedence.
●
This item cannot be set when [Barcode Adjustment Mode] is set to one of [Mode 1] to [Mode 3].
●
Print density will be lighter when you select stronger improvement. It may also result in less sharp edges
and rougher details.
●
If the problem cannot be solved in spite of this item having been set, set <Special Printing Mode D> to
<On>.
Special Printing Mode D(P. 705)
Do smudges appear on copy job output depending on the paper type or the
operating environment?
●
Change the setting for <Special Printing Mode Z>. The improvement effect is weakest with <Mode 1> and
strongest with <Mode 3>. Try the adjustment starting with <Mode 1>.
Special Printing Mode Z(P. 704)
●
This item is only effective for copy job output.
●
Print density will be lighter when you select stronger improvement. It may also result in less sharp edges
and rougher details.
●
If the problem cannot be solved in spite of this item having been set, set <Special Printing Mode D> to
<On>.
Special Printing Mode D(P. 705)
Are the characters or images printed doubly depending on the paper type or
the operating environment?
●
Change the setting for <Smudge Reduction Mode>. Setting this item to <On> may solve the problem.
Smudge Reduction Mode(P. 703)
●
If the print quality has deteriorated after you set this item to <On>, return it to <Off>.
Do streaks appear immediately after you replace the toner cartridge or when
you print for the first time after a long time?
●
Change the setting for <Special Printing Mode B>. The improvement effect is weakest with <Mode 1> and
strongest with <Mode 3>. Try the adjustment starting with <Mode 1>.
Special Printing Mode B(P. 705)
Troubleshooting
[Special Print Adjustment A]
768
Select the mode
Advertisement
Table of Contents
