Table of Contents
Advertisement
Configuration of the system
Node Object
Node Object
Object Request
Variable
SNVT type:
name:
SNVT_obj_re
nviRequest
quest
Object Response
Variable name:
SNVT type:
nvoStatus
SNVT_object_status
5-22
These variables are used for controlling all functional
blocks via the commissioning tool.
Supported functions:
RQ_Normal
RQ_Update_Status
RQ_Report_Mask
RQ_Disabled
RQ_Enable
This output network variable reports the status for any functional
block on a device. It is also used to report the status of the entire de-
vice and all functional blocks on the device.
Description:
Returns the specified functional block to normal
operation.
Requests the status of the specified functional
block.
Requests a status mask reporting the status bits
that are supported by the specified functional
block.
Requests the specified functional block to
change to the disabled state. In the disabled
state, output network variables belonging to the
functional block are not propagated within the
network.
Requests the specified functional block to
change to the enabled state. In the enabled state,
output network variables belonging to the func-
tional block are propagated within the network
as defined by the functional block.
Description:
TR200 LonWorks
Advertisement
Table of Contents
