Table of Contents
Advertisement
LED Behavior
MS: Service LED (red)
Situation
Configured state (Nornal op-
eration)
Non configures state
Applicationless state
Watchdog resets
Faulty hardware
NS: Status LED (green)
Situation
Node configured
Wink service
TR200 LonWorks
LED
½ sec. ON, then continously
OFF
Flashing ½ Hz
1 sec. ON, 2 sec. OFF, then
continuously ON
Short flash about each 3 sec. Indicates problem with ap-
Steady ON or OFF
LED
Steady ON
Flashing ½ Hz for 20 sec. Wink service activated in
How to install
Description
The node is configures and
running normally
Node is not configures but
has an application. Proceed
with loading node.
Node has no application, the
LonWorks option needs re-
placing or reprogramming
plication. The LonWorks op-
tion needs replacing
The LonWorks option needs
replacing
Description
The node is configured
and running normally
order to identify node.
4-5
Advertisement
Table of Contents
