Trane LonWorks TR200 Instruction Manual page 29

Configuration of the system
Analog Output (X42 /11)
Variable name: SNVT type:
nvi109AnOut3 SNVT_lev_percent
These variables contain the value allocated to the analog output terminal X42/7-11 of the
variable type is changeable with the commissioning tool.
This variable is available only if the Programmable I/O option (MCB 115) has been installed.
Setting of RTC
Variable SNVT
name: type:
nviTimeStamp SNVT_time_stamp
Use this input to set the built-in Real Time Clock.
ECB Option Mode
Variable SNVT
name: type:
nviECBMode SNVT_state
Controls the operation mode of the ECB option. The binary value of this variable is mapped directly into par.
31-00 Bypass Mode.
[0] Drive
[1] Bypass
ECB Remote Bypass Activation
Variable SNVT
name: type:
nviECBActivation SNVT_state
Controls the remote activation of the ECB option.
The binary value of this variable is mapped directly into par. 31-90.
[0] Disabled
[1] Enabled
This input variable applies only if the ECB option is installed in the adjustable frequency drive.
5-8
Min.:
0 %
Year Month
2000 -3000 0 - 12 0 - 31
Boolean 1 bit x 16
Boolean 1 bit x 16
Value:
Max.: Resolution:
100 %
Analog I/O option
Field:
Day Hour Minute
0 - 23 0 - 59
State:
State:
TR200 LonWorks
0.01%
. The
Second
0 - 59