Table of Contents
Advertisement
Configuration of the system
Network Variable Description - VSD Profile - Configuration
Max Motor Speed [%]
Variable
SNVT
name:
type:
nciMaxSpeed
SNVT_lev_percent
This variable configures the maximum motor speed in % and associates it with par.4-13
[RPM]
(par. 4-14 in Hz mode).
The value is entered as a percent of nominal speed, as defined by the Nominal Speed (nciNmlSpeed) configu-
ration value.
For more information on reference scaling, please refer to the
than 163.830% is requested, use the parameter access command.
Min Motor Speed [%]
Variable
SNVT
name:
type:
nciMinSpeed
SNVT_lev_percent
This variable configures the minimum motor speed in % and associates it with par.4-11
[RPM]
(par. 4-12 in Hz mode).
The value is entered as a percent of nominal speed, as defined by the Nominal Speed (nciNmlSpeed) configu-
ration value.
For more information on reference scaling, please refer to the
Nom Motor Speed [RPM]
Variable
SNVT
name:
type:
nciNmlSpeed
SNVT_rpm
This variable configures the nominal motor speed in RPM and associates it with par.1-25
Speed.
Please note that this variable can be adjusted only while the adjustable frequency drive is stopped.
If a value lower than 10 RPM is entered, nciNmlSpeed will be set to 10 RPM.
Nominal Motor Frequency [Hz]
Variable
SNVT
name:
type:
nciNmlFreq
SNVT_freq_hz
This variable configures the nominal motor frequency and associates it with par.1-23
Please note that this variable can be adjusted only while the adjustable frequency drive is stopped.
5-20
Default value:
100 %
How to Control the TR200
Default value:
0 %
How to Control the TR200
Default value:
1420 RPM
Default value:
Min value:
50 Hz
Min value:
Max value:
0 %
163.830%
Motor Speed High Limit
section. If a value higher
Min value:
Max value:
0 %
163.830%
Motor Speed Low Limit
section.
Min value:
Max value:
10 RPM
65,534 RPM
Motor Nominal
Max value:
20 Hz
100 Hz
Motor
Frequency.
TR200 LonWorks
Advertisement
Table of Contents
