Teledyne T3AWG2152 Operator's Manual page 63

Now if you set the Offset to 1MHz the coupling equation will be:
CH2 Frequency = Channel1 Frequency*2.5 + 1MHz and changing channel 1's frequency will change
channel 2's frequency to maintain the specified ratio and offset in real time: if you set Channel 1
frequency to 1MHz you will get 3.5MHz on channel 2.
Example: Amplitude & Offset Coupling
1. Set the Channel 2 coupling button to ON and the coupling parameters will appear
2. Check the Amplitude and the Offset parameter
3. Set Amplitude Ratio to 1 and Offset to 0
4. Set Offset Ratio to 1 and Offset to 0
This coupling configuration ensures that the amplitude and offset parameters on both channels are the
same: if you move the amplitude or offset parameter on Channel 1 you will see that the amplitude and
offset on Channel 2 will change at the same time of the same quantity.
Operator's Manual Simple AFG Application
63