Table of Contents
Advertisement
Appendix 5
Datavideo usually releases new firmware containing new features or reported bug fixes
from time to time. Customers can either download the HS-2850 firmware as they wish or
contact their local dealer or reseller for assistance.
This section outlines the firmware upgrade process which should take approximately 1 hour
20 minutes to complete.
The existing HS-2850 settings should persist through the firmware upgrade process, which
should not be interrupted once started as this could result in a non-responsive unit.
Successful firmware upgrade on HS-2850 requires:
The latest firmware update file for the HS-2850 (This can be obtained from your local
Datavideo office or dealer).
The HS-2850 power adapter.
The SEConfig software.
A Windows 7 computer with an Ethernet port.
An Ethernet cable.
Keyboard Firmware Update
Switch off or shut down the HS-2850 and Computer in the normal way.
1.
Connect the Ethernet cable between the HS-2850 rear panel and the Windows 7
2.
Computer.
Turn on the Windows 7 Computer.
3.
Unzip the firmware update folder to the Computer Desktop so the file within it is easy to
4.
locate.
Double click the firmware update icon to launch the Flash Update Utility.
5.
Confirm the supported devices list says SE-2850 then click NEXT.
6.
Firmware Update
74
Advertisement
Table of Contents
