Change The Switcher Ip Address - Datavideo HS-2850 Instruction Manual

3.2.1 Change the Switcher IP Address

The Switcher Network Setup Utility allows the user to change the switcher IP
address. Locate, on your desktop, the icon as shown in the diagram below and
then double click it to open the utility software.
After the Switcher Network Setup Utility is opened, you will see the following SE Network
Setup window on the screen.
To change the IP address, click the Setup button to display the Network Parameters as
shown in the diagram below. Update the network parameters accordingly.
5. Click Connect and additional function
tabs will immediately become available
at the top of the application window.
These are:

Switcher

Settings

Images Upload

M/V Input Source Labels

M/V Layout

M/V 'A' Upload

M/V 'B' Upload

M/V 'C' Upload
37