Table of Contents
Advertisement
SPECIAL
FUNCTION
FACTORY RESET
EXIT
* Selectable on PGM only; external HDMI and MV are allowed on 1 and 2 ONLY
MAIN ADJUST
The first menu to be displayed is the MAIN ADJUST Menu.
To access the MAIN ADJUST Menu press enter, the Brightness setting will be highlighted.
To adjust the Brightness press Enter again. Use the Up / Down buttons to change the setting
and then press Enter to store the new value and return to the main menu.
To select a different setting (Brightness, Contrast, Saturation, Sharpness, TINT), use the Up /
Down buttons. Follow the same procedure to set other values.
COLOR
To access the menu press enter so that Color Adjust option is highlighted
To access the option for the selected color setting, press enter again.
Use the Up / Down buttons to navigate the available color settings.
You can choose:
Information
The System Information Menu displays Horizontal Frequency, Vertical Frequency,
Resolution and the Firmware Version of the monitor.
Once selected, the information will be displayed as follows:
You will see:
H. FREQUENCY
Español
Italiano
Dutch
Português
Russian
EXIT
OSD TIMEOUT
FRAME RATIO
4:3 MARK LINE
CENTRAL MARK
CINEMA ZONE MARK
AUDIO CHANNEL L*
AUDIO CHANNEL R*
EXIT
7500
9300
6500
USER COLOR
33.7KHZ
5-120 SEC
90 / 80 / 0FF
ON / OFF
ON / OFF
ON / OFF
1/2/3/4
1/2/3/4
31
Advertisement
Table of Contents
