Table of Contents
Advertisement
The READ button can be used to load the current label of a selected input into the
application window on the left. This selected label can then be edited using the TEXT box. If
required the font and colour of the text can also be changed.
The WRITE button can then be used to write the new label text into the switcher's memory.
3.7 Multiview Layout Tab
The Multiview Layout Tab allows you to set the Multiview Layout displayed on the two
HDMI outputs.
There are five variants listed as follows:
A
W1 = PVW / PGM / Inputs 1-2
W2 = Inputs 3-8
B
W1 = PVW / PGM / Inputs 1-8
W2 = PGM
C
W1 = PVW / PGM / Inputs 1-8
W2 = PGM
D
W1 = PVW / PGM / Inputs 1-8
W2 = W1
E
W1 = PVW / PGM / Inputs 1-8
W2 = W1
The "Audio level bars to Multi View" option allows you to enable / disable the audio level
bars on the Multiview window.
53
Advertisement
Table of Contents
