Logo And Clock - Datavideo HS-2850 Instruction Manual

2.2.3 Logo and Clock

When the button is active the selected logo is shown. These logos are selected from the
switcher's memory and positioned using a menu option see the section on OSD MENU
options for details.
LOGO 2 or CLOCK
The user cannot display LOGO 2 and CLOCK at the same time. Instead use LOGO 1 and
CLOCK together or use LOGO 1 and LOGO 2 together.
The clock time can be synchronized with a computer or set manually using a menu option.
The colour and font used in the clock digits can be changed using the supplied SEConfig
software. See Chapter 3 for more details on using this software or see OSD MENU Options
onwards for the Clock menu options.
TIMER
In some mixing or switching applications it is useful to have a countdown timer. It could be
that the input is a pre-recorded video clip and you need to know when to be ready to switch
away from it.
This countdown timer function is only seen in the status area of the HDMI multi-view output
to the right of the normal Clock function. The timer can be selected for one input channel,
several channels or all channels.
When the TIMER button is active and the user switches to a selected input channel, the
countdown starts on the HDMI multi-view.
The value of the countdown, in minutes and seconds (MM:SS), is set by a menu option.
Whilst the countdown is in progress, T-Bar operation is ignored.
When the countdown reaches zero, the user can then switch or transition to another input
channel. If the countdown reaches zero the switcher will not automatically change to the
selected Preset source.
The HS-2850 has the ability to store six static logos and one
dynamic logo. The logo files are transferred to the HS-2850
from a Windows PC using the Ethernet connection and the
supplied SEConfig software. See Chapter 3 for more details on
using this software.
LOGO 1
The LOGO 1 and LOGO 2 buttons are used to display pre-
selected logos on the HS-2850 Preset and Program outputs.
18